Lignotec EN

THE LIGNO SYSTEM

1|2|3

For turning sharp details after copying, the Swivel Copier is easily replaced by either a long or short tool rest.	The short tool rest can be used for turning sharp details.
The handle of the swivel copier can be used as a hand tool rest to cut sharp corners.
The template holders 653 also accept original masters. In this case the template holder 653 is turned through 90 °and pointed screws are used support the master.	When the length of the work piece is 10 times the diameter a steady must be used. Set the steady on a turned surface.
The steady has a rough and a fine adjustment. It easily can be swung out of the way when not in use. The roller head is self-adjusting. The rollers are of industrial quality.	For dowelling the rear precisions stop is set for the desired diameter.

Back | Next