Lignotec EN

THE LIGNO SYSTEM

Technical description Lathe

Correct spindle alignment is essential for ex. drilling works.
Special bushings and pins in both headstock and tailstock guarantee perfect headstock and tailstock alignment.

This achievement allows you also to fix the headstock in different angles to the bed. Standard is 90°, 180° 270° and 360° Position.

On request also 15°,45°,60°,75°.

This unique LIGNO design allows you to put a Morse taper alignment tool both in the headstock and tailstock and make them a unit. After loosening the screws in the bushings the “unit” is moved forwards and backwards. When the screws are locked, the alignment is perfect.

The LIGNO 250 SE is equipped with adjustable machine feet allowing operation of the machine on an uneven floor.
The LIGNO 250 CE is provided with threaded holes for levelling screws or for machine feeds.

Technical data:

Between centres	1000mm
Height of centres	250mm
Headstock	Can be moved along the bed and swivelled 360 ° to any convenient position. Spindle Bore 18 Ø mm, Morse Taper 3, Spindle thread M33 DIN 800, 2 conical roller bearings. Distance 220mm apart.
Tailstock	Can be moved along the bed and swivelled 360° to any convenient position Bore 12 Ø mm, Morse Taper 3, Travel 100mm. Sleeve with mm scale.
Motor	Three-phase 380 V 1,1 or 1,5 kW, Hitachi frequency inverter. 230 V standard household supplies.
Speed range	Infinitely variable between 50 and 3000 rpm, Remote control with magnet.
Weight	LIGNO 250 CE 310 Kg LIGNO 250 SE 241 Kg
Measurements	1500x540x1220mm (LxWxH)

Back | Next